One of the most important things to remember when using a lawn mower is to operate it only when the grass is dry. Therefore, as much as possible, one is advised not to use the lawn mower if the grass is damp.
Rust Problems: Can Lawn Mower Get Wet without Rusting?
In line with that one would ask can lawn mowers get wet? Ideally, the lawn mower should only be used to cut dry grass; however, mowing damp grasses is impossible to avoid, especially during wet and rainy seasons.
Also, there are times when the lawn mower gets in contact with water, particularly when the machine is left outdoors exposed to different weather elements. A lawn mower, just like any non-waterproof machine, does not bode well with water.
If left out in the rain, a lawn mower’s engine might refuse to start. If left longer under the rain, the lawn mower might get damaged and stop working altogether. So the answer to the question “can lawn mowers get wet?” is no.
Maintenance of the Lawn Mower
Because the answer to the question “can lawn mowers get wet?” is no and wet weather cannot be avoided at all, here are some maintenance tips that one can follow in order to keep one’s lawn mower in tip top shape during the wet and raining weather.
Clean All Sides of the Mower Deck
By saying all sides, that means cleaning the mower deck from left to right and top to bottom. The cleaning should be done religiously after every mowing of a damp yard. Mowing wet grass should be avoided if possible because the mud and grass that sticks to the mowing deck could increase chances of causing corrosion and rust on the lawn mower.
To add, mud and grass that sticks to the lawn mower could build up on the bottom of the machine and could cause the reduction of the suction capacity of the lawn mower, thereby affecting the cutting quality of the machine. Mud and grass could also accumulate around the lawn mower’s belt and could result in the belt coming off the machine’s pulley.
Oil the Machine More Often
One of the nemeses of bearings is moisture. Moisture, mud, or wet grass can cause corrosion to the lawn mower’s bearings and could shorten its service life. To prevent this from happening, it is highly recommended that the bearings, hubs, and spindles are oiled more than regular greasing intervals. Greasing the said parts will help the lawn mower during rainy and wet seasons.
Keep Track of the Belts
Wet grass would mean additional weight. The added weight that comes with moisture requires the use of torque and load just for the lawn mower’s blades to spin at its usual pace in order to cut the grass properly.
The added load on the lawn mower may lead to belts slipping, breaking, and burning up more often than when used in dry weather and grass. To avoid a broken belt incident, make it a practice that the belts are checked before using and after cleaning the lawn mower.
Keep the Blades Sharp
The blades are important, if not the most important, part of a lawn mower. It is a no-brainer because it is the main component used in cutting the grass. It is always emphasized that the blades should be kept sharp.
Normally, sharpening the blades at least three (3) to four (4) times a year will do the job. However, such a sharpening interval is not enough when the lawn mower is being often used to cut moist or damp grass in the yard.
During wet conditions, it is advisable to sharpen the blades of the lawn mower more often. Such need is brought about by the additional moisture and weight that comes with damp grass.
Since the mower deck is being opened during the cleaning of the lawn mower, getting to the blade and pulling it out for sharpening does not require too much effort.
These four (4) maintenance tips should be done over and above the normal maintenance routine done for the lawn mower during dry seasons.Gas vs Electric Lawn Mower
Following said tips can hugely help the lawn mower in surviving rainy and wet weather and could mean the difference between the lawn mower’s long service life and total damage. Although the entire side effects of water to the motor cannot be wholly prevented, they can be limited.